PMI® Swaged Termination - 11 mm & 12.5 mm

PMI® Swaged Terminations provide a high-strength, permanent, no-knot termination for compatible PMI® ropes. Factory applied using a precision steel die, the termination combines an aluminum sleeve with a stainless steel thimble to create a durable attachment point that is stronger than a knotted termination and nearly as strong as the rope itself.

Available for both 11 mm and 12.5 mm rope, each configuration can be ordered with either one factory-installed swaged termination or two terminations for a finished termination at both ends of the rope. PMI must install swaged terminations at the factory; they cannot be added after the rope leaves the factory.

Key Features

• Available for 11 mm and 12.5 mm compatible PMI® ropes
• Choice of one or two factory-installed terminations
• High-strength, permanent termination
• No knot required
• Stronger than knotted terminations
• Nearly as strong as the rope itself
• Aluminum swaged sleeve
• Stainless steel thimble
• Applied using a precision steel die
• Factory installed by PMI
• Made in USA
• Standards/Compliance: ANSI Z359.15 when used with applicable PMI® Hudson Classic Professional or PMI® Patriot Vertical Lifeline configurations; NFPA 2500 (1983), 2022 Edition, Technical Use, when used with applicable rope configurations; Made in USA

11 mm Swaged Termination

• Diameter: 11 mm
• Termination Options: One or Two
• Minimum Breaking Strength: 23.3 kN (5,248 lbf) when used with 11 mm PMI® Hudson Classic Professional or PMI® Patriot Vertical Lifeline
• Compatible with applicable 11 mm PMI® Classic and Patriot ropes

12.5 mm Swaged Termination

• Diameter: 12.5 mm
• Termination Options: One or Two
• Minimum Breaking Strength: 34.3 kN (7,716 lbf)
• Compatible with applicable 12.5 mm PMI® Hudson Classic ropes